logs Dunkeswell and North Hill 23/8/17...

[dave]

DUNKESWELL 23/8/17



Log and a few requests from a good visit, first for a few years, asked and given permission to wander, over on the hangar side most were open access given ok, only downside just as i was getting there a chap in the only car was leaving the microlight hangar... Oh well here's straight from the book.



N111SC, G-DUNK, G-CGWH, G-BMXB, G-BAFU, G-PPLS, G-CEPX, G-RYNS, G-AXTO, G-BLHS, G-LIVH/330238, G-BBCS, G-PHAT, OH-SKA, G-BUTH, N3458V/O7159, G-NIEN, G-BKVM/115684, G-BTUR, G-BOLC, G-BYBK, G-BTON, G-GROE, G-BNKD, G-AWBX, 479878, G-BIOU, G-BIIA, G-RTRV, G-CHST, G-BCKS, G-TBOK, G-BEOK, G-JBRD, G-BKAY, G-BKPA, G-OSLO, G-PEJM, G-ASII, G-AVGZ, G-AVWR, G-BDJC, G-D-EMPS, G-CBSL/RED67, G-ASZE, G-AWUJ, G-CHPG, N8412B, G-GKUE, G-DGST, G-N147GT, G-CIBD, G- GLST,G-OLSA, G-FFBG, G-AYSX, G-BWYJ/WG469, G-CIJN/317, NC33543, G-OCPC, G-BDZD, G-AVSC, G-OFRY, G-DODD, G-BREZ, G-BPFZ, G-BGVS, N766AM, G-CBIL, G-ELUN, G-BANA, G-CJAF, G-CBKR, N4381Y,

N899AG, G-BAHX,G-BMMV, G-BFWD, and up in the roof of one hangar G-AFIN,

Wrecks-

I-IJMW, TC-NLB, N21381, a c/pit G-BPRV?, a SCHW 269C wrecked pod?



Req's,-

in the spray hangar by the car racing a ?, bare metal...another bare metal ? In the sales hangar

Possibly G-CITT?, Miss pole -AXXD?, Last in the row of hangars possibly 13 where the doors fold back to open through a half inch gap the tail of a high wing tail dragger all yellow?



NORTH HILL



Again very friendly seen were G-CJMZ, G-DJWS, G-CLRD, G-CKEK, G-DHCX, G-CFZF, G-CJZK, G-CHMT,

G-CDSC, and Tug G-DSGC



Thats it, any corrections welcomed, plus help with the ?'s would be appreciated...

Regards,

dave...

[graham]

Hi Dave

here's a link to the foreigners based at Dunkeswell, still looking for a list of Brits

www.laasdata.com/fra/fra-by-base.php?b=Dunkeswell

[dave]

hi,
here's a update if anyone's following-

G-AXXC cp301 the mispole.
N68427 A.75 the yellow tail dragger.
G-HFLA Hughes the wrecked pod.
G-CITT Mooney the bare metal a/c in sales hangar.

still work in hand the bare metal a/c in Moore's paint shop...

hope this helps someone, regards,
dave...